• FLUXO 5 Solvent for White Contrast Paint for Magnetic Particle Inspection

FLUXO 5 Solvent for White Contrast Paint for Magnetic Particle Inspection

High Evaporation Rate

500 ml Aerosol cans

Aspect & colour: uncolor mobil liquid

Density : 810 g.cm-3 (15°C)

Flash Point : < 21°C

The part is subjected to an intense magnetic flux, which is deviated by the presence of a defect. This escape attracts the particles of the product and the defects now are clearly visible as fluorescent or black lines.

FLUXO 5: is a solution solvent.

This Magnetic particle examination is used for the detection of emerging defects in all ferromagnetic materials. Applicability: Aeronautics, Automobile, Railway, etc...

Components are magnetised and Black Magnetic Ink FLUXO 3 is applied to the test area, normally by spraying immediately prior to and during magnetisation. Application of Black Magnetic Ink FLUXO 3 should cease before the magnetisation is switched off. Defects will show up as well defined black indications and inspection should take place in good white light of at least 500 lux.

It is not practical to use Black Magnetic Ink FLUXO 3 on dark coloured substrates as it would be difficult for the inspector to identify indications against the dark background. For this reason, FLUXO 4 White Contrast Paint is frequently used to provide a contrasting white background against the black indications thereby enabling the inspector see and interpret indications more easily.

FLUXO 5 is used in order to wipe off the White Contract Paint FLUXO 4 after magnetic testing.

FLUXO 5 Solvent for White Contrast Paint for Magnetic Particle Inspection

  • Product Code: FLUXO 5
  • Availability: In Stock
5.41€